2005-2010 Mustang GT 62mm Turbo System

2005-2010 Mustang GT 62mm Turbo System
2005-2010 Mustang GT 62mm Turbo System2005-2010 Mustang GT 62mm Turbo System2005-2010 Mustang GT 62mm Turbo System
Part #: HELL-62T-0507
Regular price: $4,995.00
On Sale: $4,695.00
KIT: 
Quantity:
 
2005-2010 Mustang GT Single 62mm Turbo System

The 2005 Mustang revolutionized the way that we looked at the Mustang, and with Hellion Power Systems turbo kit for the '05-'08 Mustang, you can change the way people look at yours. The kits comes standard with the highest quality piping with polished visible pipes. The pipes carry a lifetime warranty, which accompanies the 1 year unconditional warranty on the standard 62mm Turbocharger from Turbonetics. Boost your power output to more than 500 rwhp with our standard kit while still retaining all the factory accessories, and without cutting the body. So why buy the Hellion Power Systems turbo kit for the 05-09 Mustang GT? Our kits are 100%, 16 gauge stainless steel, made for us by Bassani manufacturing. Also, our kits are made completely in the U.S.A. - they are not cheap imports from overseas. When it comes to your vehicle's performance, you get what you pay for. So the real question is, why not buy the best? A complete list of upgrades, deletes, and pricing can be seen below.

System features:
All stainless steel construction standard
Turbonetics 62mm turbo standard (Capable of supporting up to 600 hp to the tires, 1 year no fault/no hassle warranty)
Complete Kit:
Turbonetics Evolution wastegate
High flow durable bar and plate intercooler
39 lb injectors standard - (Not in Tuner Kit)
SCT X3 Tuner w/ Custom Tune - (Not in Tuner Kit) Optional retention of factory catalytic converters (CARB EO Approval Pending)
NO CUTTING OF BODY NEEDED
The most simple system installation available
Upgradeable to T76 T series Turbonetics turbo (capable of supporting up to 850 hp to the tires, 1 year warranty)
No K member needed
 
BBR 2005-2010 Mustang GT Fuel System
BBR 2005-2010 Mustang GT Fuel System
Regular price: $849.99
On Sale: $779.95
2005-2010 Mustang GT BBR Fuel System
Our system is the best of the best; we have tested this system to 800+ rwhp.
Our System consists of:
-Twin GT500 Fuel Pumps
-Fuel Pump Driver Module
-BBR Fuel Pump Wiring Harness
SCT X3 Handheld Tuner
SCT X3 Handheld Tuner
Regular price: $459.95
On Sale: $379.95
SCT
The X3 arrives Pre-Loaded with DYNO Proven tune files that INCREASE HORSEPOWER, TORQUE and EVEN FUEL MILEAGE! The NEW X3 stores up to 3 Custom Tune files which can be loaded by any of SCT's Custom Tuning Dealers World Wide! With a HUGE Back-lit display, the SCT X3 Power Flash makes it EASY to read the Built-In Data Logging or Real Time Monitored Vehicle Data, view popular sensor data such as EGT, Air / Fuel Ratio or any other 0-5 Volt source!

2005-2010 Mustang GT 18 rwhp & 30 ft lbs tq
2007-2011 GT 500 57 rwhp & 39 lb rwtq
2011 Mustang GT 5.0L 28 rwhp & 32 rwtq
FREE SHIPPING
Year: Trans: Octane: 
One Custom BBR Tune for SuperCharged or Turbo
One Custom BBR Tune for SuperCharged or Turbo
Regular price: $325.00
On Sale: $275.00
1 Blow-By Racing Supercharged or Turbo Custom Tune

If you already have an SCT handheld device and you're looking for a top of the line custom mail order tune then look no further. BBR custom mail order tuning is a great way to free up power in your 1996-2013 Ford Vehicle. BBR can simply e-mail you this awesome performance tune to you along with detailed instructions on how to install the tune onto your programmer. BBR Custom tunes will give you the best throttle response out there, increase horsepower and torque across the board and quite often improve your fuel economy. BBR leads the industry in aftermarket custom tuning. We have years of dedicated racing knowledge and experience as well as many research & development hours invested into our tune to ensure you the more than just horsepower, but overall drive-ability and performance with the many modifications done to your cars computer system, including torque management, adaptive learning and the drive-by-wire tables. With BBR tuning, you can drop nearly a half second in the quarter mile on just a tune alone.

After your order one of our custom e-mail tunes, one of our experienced sales staff members will contact you to find out about your application. Information needed will include : Computer Code, SCT Serial #, List of modifications, Octane level and Rear tire size. This information is needed so Chris Jones BBR tuner can develop your awesome custom tune file in a timely manner.

Tune turn-around time est. 24-48 hours from time of purchase.


FYI
We keep your custom tune on file so if you ever purchase more performance parts from BBR you can request your current tune be modified free of charge. The free tune revisions are for new parts purchased from BBR. We stock a wide variety of Aftermarket parts that are BBR tuning approved. With a wide variety of parts on the market that are not tune friendly we suggest you speak with our technical sales team before you invest in headers, nitrous, superchargers, turbos, throttle body's, and camshafts.

ALL Forced induction Tune now come with Data-logging; this option gives you unlimited data-logging until your tunes is correct and to your satisfactory.
TC-1 Turbo Controller and Vehicle Data Logger
TC-1 Turbo Controller and Vehicle Data Logger
Regular price: $399.95
On Sale: $324.95
Features

· Flexible turbo control system adaptable to most turbocharged vehicles.
· Open and closed loop control modes. Includes programmable duty cycle or boost curves based on RPM, vehicle speed and or time.
· Compatible with most boost control solenoid valves.
· Built-in 4-bar MAP sensor. User selectable units (psi, In-Hg, or kPa).
· Bright transflective LCD display with backlight is readable in all lighting conditions from total darkness to direct sunlight.
· Built-in data logging capability with 16 Mbit DataFLASH memory. Rates ranging from 2 samples/sec for 5 hours to 100 samples/sec for 6 minutes.
· Logs boost (MAP), RPM, vehicle speed, throttle position, solenoid duty cycle, battery volts, and two 0-5V analog inputs. If you need to add a vehicle speed sensor to a race car, refer to our Vehicle Speed Sensor Tech Note.
· Flexible RPM input compatible with high voltage coil drive (vehicles with coil packs or distributor ignition), standard 12 volt tach signal, or low level logic drive (newer vehicles with coil-on-plug).
· 0-5 Volt analog inputs are compatible with Daytona Sensors single or dual channel WEGO systems for logging wide-band air/fuel ratio data.
· Programmable general purpose input/output can be used for an external scramble switch or to control a water/methanol injection system.
· USB interface to PC. Windows software for data logging and advanced setup functions.
· Heavy duty industrial grade clamping terminal blocks allow easy and reliable hookup without soldering or crimping.
· Rugged aluminum housing and industrial grade rotary encoder knob (for user input).
· Compact size: 4-1/2”L x 3”W x 1”H
Volcanic Turbo Shield; Fits T4 Flange Turbo Housings
Volcanic Turbo Shield; Fits T4 Flange Turbo Housings
Regular price: $249.99
On Sale: $225.00
Our Lava turbo heat shields were designed for and tested on the most hardcore racing applications. Lava Turbo Heat Shield™ reduces turbo lag while protecting other engine components and reducing under hood temperatures. The turbo heat shields are custom fit and use extreme temperature materials to keep heat in the hot side of the turbo where it belongs. The Lava Turbo Shield™ has a rugged outer layer of our Lava Mat™ that is 25% stronger than comparable fiberglass shields, giving them a longer life span. The silica contact layer and silica insulation, make the turbo shield capable of withstanding 1800°F continuous. The custom fit design means you do not have to trim or fit the heat shield blanket to fit your turbo housings making installation a snap.


* Continuous operating temperature of 1800°F, 2200°F intermittent
* Capable of reducing up to 60% of radiant heat
* Superior design with silica contact layer, won’t fall apart like similar volcano turbo shields
* Reduces turbo lag, lowers under hood temperatures
* Custom fit installs in minutes
Heatshield Armor Down Pipe Shield; 1/2 Inch Thick 1 Foot Wide by 3 Feet Long
Heatshield Armor Down Pipe Shield; 1/2 Inch Thick 1 Foot Wide by 3 Feet Long
Regular price: $59.99
On Sale: $45.00
Our Turbo Heat Shield Kit™ can help to increase horsepower and reduce turbo lag while protecting other engine components. Unlike other turbo heat shield kits that use exhaust wrap, our HP Turbo Kit™ features extreme temperature insulation materials, which provides greater heat protection, performance, and durability. Our complete turbo kit includes our extreme temperature turbo blanket and our HP Armor™ for your down pipe, making turbo heat shield insulation kit on the cutting edge of technology and performance. Capable of withstanding 1800°F continuous, our turbo heat shield kit is designed for street performance and even the most hardcore racing applications. Using a simple 2 piece design with comprehensive instructions, installation is simple even for the novice installer.


* Continuous operating temperature of 1800°F, 2200°F intermittent
* Capable of reducing up to 60% of radiant heat
* Reduces turbo lag, lowers under hood temperatures
* Universal kit, fits many turbo applications
HP Turbo Shield; Fits T4 Flange Turbo Housings
HP Turbo Shield; Fits T4 Flange Turbo Housings
Regular price: $199.99
On Sale: $165.00
This turbo heat shield helps to reduce turbo lag while protecting other engine components. The custom fit turbo heat bags use cutting edge technology and performance to keep the heat in the hot side of the turbo where it belongs. The custom fit design means you do not have to trim or fit the heat shield blanket to fit your turbo housings, making installation a snap. Capable of withstanding 1800°F continuous, our turbo heat shields are designed for street performance and even the most hardcore racing applications. The custom fit design means you do not have to trim or fit the heat shield blanket to fit your turbo housings making installation a snap.


* Continuous operating temperature of 1800°F, 2200°F intermittent
* Capable of reducing up to 60% of radiant heat, reduces under hood temperatures
* Reduces turbo lag and turbo chatter
* Made for T2, T3, and T4 flange turbos
* Custom fit, installs in minutes
* Custom turbo heat shields available, may require housing to make prototype, design fees and minimums may apply
* Made in the USA
Thermaflect Tape  - Heat Shield Tape; 1-1/2 Inches Wide by 20 Foot Roll
Thermaflect Tape  - Heat Shield Tape; 1-1/2 Inches Wide by 20 Foot Roll
Regular price: $29.99
On Sale: $19.99
This heat shield tape reflects up to 90% of radiant heat away from wires, lines, cables, hoses, and more! It is an excellent way to insulate components without disassembly, or it may be used as a means to hold other thermal insulation in place. Thermaflect Tape™ is also excellent as a quick "on the go" solution to heat problems. Our heat shield tape is a must have for your race track tool box! Durable cloth construction makes it longer lasting and more rugged than similar products. This reflective heat shield tape withstands 1100°F continuous radiant heat (requires minimum of 1” of airspace) and 500°F of direct contact. The reflective heat shield tape cuts easily and installation is simple with our high temperature self-adhesive backing that sticks to any CLEAN surface. Wider heat shield tape rolls available up to 150’ long, minimums will apply.


* Continuous operating reflective temperature of 1100°F, 2000°F intermittent
* Capable of reducing up to 90% of radiant heat
* Adhesive backing sticks to almost any clean surface
* Helps shield fuel lines, brake lines, wire looms, and more from radiant heat
* Bulk rolls and custom widths available, minimums apply
Blow-By Racing is not responsible for any prices changes, mis-mark items , or any other mis-printed items.